Cement Tile Roof Restoration

  Our Cement Tile Roof Restoration Process involves:  

• Replace all cracked and broken tiles. Even if they are fractured they will be replaced.

• Apply a mould rid to the entire roof to prevent the re-occurrence of any form of mould or fungi.

• Pressure clean the entire roof area. Our pressure cleaners are all 4000psi, the machines are this size so that they remove all the mould and lichen, all the dirt and take the tile back to a bare surface.

• Remove the ridge capping and re-bed if needed. If the ridge capping is loose it will need to be re-bedded so that they are secure for us to re-point them.

• Re-point all ridge caps with a polymer based flexible pointing mortar. This is troweled on and because it’s a flexible mortar, this is applied as it will not crack with the normal movement of your home for example the expansion and contraction from heat and cold.

• Weep holes are then installed into the flexible mortar to allow for any moisture to run out (If these are not installed the roof will leak in continuous rain)

• The roof is then thoroughly blown off with a petrol blower/vacuum and if necessary will be swept with a hard bristle broom. All the gutters and valley irons will be cleaned free from debris and your downpipes will be flushed.

• Apply a sealer / primer coat to the entire roof. This coat seals the porosity in the tile and makes the tile like new.

• Apply 2 or more coats of the roofing membrane in the colour of your choice. The membrane is a very  thick paint and has to be applied with an airless paint sprayer to get the right consistency. The paint is built up to a specific thickness depending on your roofs condition.

• The final stage of the roof restoration is the “final inspection” the involves both yourself and a Master Roofing team member going over the roof restoration to ensure that you are happy the roof restoration.

    Portfolio of our work:

    To see a portfolio of our work, visit the following links on our Blog:
    Click here to see a cement Tile Roof Restoration in Banora Point, NSW in 'Torres Blue'
    Click here to see a Cement Tile Roof Restoration in Mudgeeraba, QLD in 'Charcoal'
    Click here to see a Cement Tile Roof Restoration in Burleigh Waters, QLD in 'Slate Grey'
    Click here to see a Cement Tile Roof Restoration in Helensvale, QLD in 'Heritage Red'
    Click here to see a Cement Tile Roof Restoration in Palm Beach, QLD in 'Charcoal'
    Click here to see a Cement Tile Roof Restoration in Helensvale, QLD in 'Heritage Red'
    Click here to see a Cement Tile Roof Restoration in Capalaba, QLD in 'Monument'
    Click here to see a Cement Tile Roof Restoration in Murwillumbah, NSW in 'Tuscany'
    Click here to see a Cement Tile Roof Restoration in Algester, QLD in 'Heritage Red'
    Click here to see a Cement Tile Roof Restoration in Eight Mile Plains, QLD in 'Terracotta'
    Click here to see a Cement Tile Roof Restoration in Birkdale, QLD in 'Heritage Red'
    Click here to see a Cement Tile Roof Restoration in Bilambil Heights, NSW in 'Slate Grey'
    Click here to see a Cement Tile Roof Restoration in Belmont, QLD
    Click here to see a Cement Tile Roof Restoration in Burleigh Heads , QLD in 'English
    Summer'

Colour Options:

    Click on the colour chart below to view the range of Shieldcoat colours available to you. You can also visit Shieldcoat's website, simply click here        

Shieldcoat Colour Range for Tile and Metal Roof Restorations

Gallery of our work

Roof  Restoration  Process

Change broken tiles

High pressure clean the roof are

Repoint and Rebed ridge caps

Apply two coats of roofing membrane

A Before & After Photo of a Cement Tile Roof Restoration